PACE Products · Asphalt & Pavement Maintenance

Park-King® One-Coat Blacktop Sealer

Protect aging asphalt with a penetrating blacktop sealer designed to seal pores, resist weather damage, restore a satin-black finish and help extend pavement service life.

Park-King blacktop sealer applied to commercial asphalt pavement
One-Coat System Efficient pavement maintenance
4-Hour Return to Service Minimize downtime
1 Gal / 100 Sq. Ft. Average blacktop coverage
Penetrating Protection Seals asphalt pores
Why Park-King?

Protect Asphalt Before Weathering Becomes Failure

Sun, water, snow and temperature changes gradually dry, oxidize and open the pores in asphalt. Park-King is designed to penetrate and seal those vulnerable areas before deterioration leads to more expensive pavement replacement.

01

Deep Penetration

Penetrates into the asphalt surface to help seal individual pores rather than simply forming a surface film.

02

Fast Drying

Properly applied pavement can typically return to use in about four hours.

03

One-Coat Efficiency

A one-coat application helps reduce labor compared with systems that require multiple coats.

04

Easy Roller Application

Designed for straightforward application to properly prepared asphalt using rollers.

05

Longer Pavement Life

Helps protect existing blacktop against weathering and premature deterioration.

06

Satin-Black Finish

Restores a clean, dark appearance that can improve the overall presentation of a commercial property.

Defense in Depth

Park-King Penetrates Instead of Just Sitting on the Surface

Surface-only sealers can form a thin film over the pavement. Park-King is formulated to penetrate into blacktop and seal the pores within the asphalt surface.

This penetrating action helps create waterproof protection within the pavement rather than relying solely on a coating sitting on top.

Protection Below the Surface

The Park-King formulation is designed to penetrate asphalt pores and provide a protective barrier that is less vulnerable to peeling or scraping than a surface-only film.

4 Hours

Back in Service in About Four Hours

Park-King is designed to dry quickly so commercial parking areas and paved surfaces can return to use without unnecessary downtime.

Application & Coverage

Simple One-Coat Application

Park-King is designed for easy roller application to properly prepared asphalt surfaces.

Application Approximate Coverage
Average Blacktop 1 gallon / 100 sq. ft.
Protect the Investment

Maintenance That Helps Asphalt Last—and Look Better

Pavement is a significant property investment. Park-King combines preventive maintenance with an improved finished appearance.

Pavement Protection

Help Extend Asphalt Service Life

Regular maintenance can help slow deterioration caused by oxidation, moisture and exposure to the elements, reducing the risk of premature pavement replacement.

Property Appearance

Restore a Rich Satin-Black Finish

Park-King dries to a satin-black appearance that helps refresh worn pavement and improve the overall presentation of parking areas and commercial properties.

Product Availability

Available in Commercial Quantities

Park-King is available in commercial container sizes for parking lots, drive areas and other asphalt maintenance projects.

5 Gallon 20 litre pails
55 Gallon 205 litre barrels
Availability Notice: Park-King® is not available for sale in the state of California.
Finish the Parking Lot

Striping Equipment & Accessories

Complete the Project After Sealing

PACE also offers the Super-Striper portable parking-lot striping applicator, along with Super-Stripe Paint and stencil kits for clean, professional parking-lot markings.

Is Park-King Right for Your Pavement?

Tell us about your parking lot or asphalt surface and approximate square footage. The PACE Products team can help estimate product requirements and answer application questions.

Frequently Asked Questions

Park-King® Blacktop Sealer FAQs

Common questions about Park-King application, coverage, drying time and product availability.

What does Park-King do for asphalt?

Park-King is designed to penetrate asphalt, seal pores, protect against moisture and weathering, and help extend pavement service life.

How is Park-King different from a surface-only sealer?

Park-King is formulated to penetrate into blacktop rather than relying only on a thin film sitting on the pavement surface.

How long before the pavement can be used?

The current Park-King product information states that blacktop can typically return to use in about four hours after application.

How much Park-King do I need?

Average blacktop requires approximately one gallon of Park-King per 100 square feet.

Is Park-King a one-coat product?

Yes. Park-King is designed as a one-coat blacktop sealing system, which can help reduce application labor.

What sizes is Park-King available in?

Park-King is available in 5-gallon / 20-litre pails and 55-gallon / 205-litre barrels.

Is Park-King available in California?

No. Park-King is not available for sale in the state of California.

Does PACE offer parking-lot striping equipment?

Yes. PACE offers the Super-Striper portable applicator along with Super-Stripe Paint and stencil kits.