Wet-Jet All Weather Asphalt Roof Coating is an amazing roof coating formulation that works equally well on wet and dry roofs. Wet-Jet is a quality asphalt base, reinforced with fiberglass. This roof coating is recommended for complete roof renewals and emergency patching. Wet-Jet Roof Coating can be applied using a brush, roller, or spray equipment.
Wet-Jet's ONE COAT APPLICATION saves you time and money!
WET-JET SEALS YOUR LEAKS WHEN YOU NEED PROTECTION MOST!
For renewing and repairing sloped or level paper roofs, gravel roofs, and metal roofs, Wet-Jet can be used for commercial, industrial and institutional applications. To solve the problem of a leaky roof, rely on Wet-Jet All Weather Roof Coating.
Smooth Metal Roof: 1.5 gallons per 100 sq. ft.
Corrugated Metal Roof: 2 gallons per 100 sq. ft.
Sloped Paper Roof: 3 gallons per 100 sq. ft.
Mineral Roll / Composition and Modified Bitumen Roof: 3 gallons per 100 sq. ft.
Sloped Gravel Roof: 6 gallons per 100 sq. ft.
Level Gravel Roof: 8 gallons per 100 sq. ft.
* Available in 5 gallon or 55 gallon quantities. 40 gallon minimum orders. *
WHAT GOES INTO PRODUCING A SUPERIOR ROOF COATING?
Modern chemistry has produced a new generation of synthetic and blended oils, ones which penetrate deeper, provide superior flexibility and last longer than ever before possible. It is an advance that has positioned WET-JET® far ahead into the future. WET-JET® performs in all climates in over 60 countries throughout the Free World.
This new technology blended with the finest asphalts gives WET-JET® its toughness...the toughness to withstand sub-freezing temperatures and still retain amazing flexibility. It expands and contracts with the roof mat even through sudden temperature drops.
The fiberglass gives WET-JET the extra strength to bridge cracks and splits...In hot weather it makes sure WET-JET won't sag or run on a metal roof - even at 400° F. Coated on smooth metal and inclined at an angle of 60°, it won't run or sag.
Our ADDITIVES -- X-5 Oil -- gives WET-JET the super penetration it needs to restore life to old sloped gravel and paper built-up roofs. Pinecel thrusts back the deadly oxidizing rays of the sun that break a roof down fast, forcing expensive, premature replacement.
These sophisticated blends give WET-JET super penetration...make it easy to apply. With brush, roller or SEAMLESS SPRAY Equipment, WET-JET goes down fast...the complete renewal takes just one coat...makes renewing roofs a simple job, not a complicated expensive nightmare.
Wet-Jet Roof Coating will save you money!
PACE's Total Roof Renewal System applying a WET-JET roof coating uses the existing roof as a base and will restore, seal, recondition and waterproof old worn out roofs, saving unnecessary tear off and replacement expense - all in one easy, one coat process. With PACE's WET-JET Roof Renewal System, over 90% of a building owner's money goes toward the materials which keep the roof watertight. Expensive contractor labor and overhead costs are bypassed. Thousands of dollars are saved on even the smallest roofs!
WET-JET IS AN ALL WEATHER ROOF COATING!
WET-JET has an unprecedented ability to expand and contract, and withstand tremendous temperature changes. Because WET-JET will give and take with the movement of the roof, it will not peel, crack or become brittle even under sub-freezing temperatures...unsurpassed for complete overall roof renewal and savings.
With WET-JET, the original Wet Surface Coating, emergency repairs can start immediately. WET-JET sticks to the wet roof, stops the leak and keeps it stopped. There's no need to wait for the sun to shine. WET-JET keeps production going and the business running; there's no lost production of business due to a damaging roof leak. Then when the storm abates, the complete roof renewal can be accomplished.